Modified Elastomeric Pad (Adapter Bearing Pad)


	Home About us Product Clients R&D News Contact us Site Map

Quick Navigation

Home

- Welcome to MGM

- Download our Profile

About us

- Company Profile

- Why choose us

- Areas of Activity

- Manufacturing

- Marketing

- Design & Development

- Technical Consultancy

Products

- Product's Home

- Technical Data Sheet

Our Clients

- Railways

- Automobile Industry

- Other Industries

Latest R&D News

- About our R&D Wing

- Latest Development

- Electron Beam Irradiation

Contact Details

- Contact Address

- Route Map

- Send Enquiry

- Customer Support

Site Map

Modified Elastomeric Pad (Adapter Bearing Pad)

Technology: Transfer/Injection Moulding

Note: Design, Dimension & Properties can be changed to suit customer's requirement.

Polymer used

Natural Rubber suitably blended

Operation Temperature

-10ºC to 70ºC

Operational Atmosphere

Heavy/Dusty/Sandy/Corrosive/Salty

Operational Humidity

0 to 100%

Metal Parts Spec

Steel IS:2062-Fe 410 WA

Properties of Elastomer

Shore A Hardness

70 to 80

Ash Content

5% Maximum

Specific Gravity

1.22 Maximum

Tensile Strength

180 Kg/cm2 Minimum.

Elongation at Break

250% Minimum.

Compression Set

25% Max.

Bond Strength

700 PSI / 49.21 Kg/cm2

After Heat Ageing

Change in SH

+7, -0

Change in TS

±25%

Change in EB

+10%, -30%

Compressive Load-Deflection Characteristics

Operational Temperature: 27± 2ºC & Machine Speed 10 ± 5 mm/min

Load in Ton	Deflection in mm
10	2 mm ± 20%
15	2.8 mm ± 20%
20	3.4 mm ± 20%

Fatigue Test Characteristics

Load 7 to 22 Ton, Frequency 2 Hz, Minimum Cycles 1,000,000
Maximum Permanent Set 1.5 mm

Compressive Load - Deflection Characteristics

Modified Elastomeric Pad (Adapter Bearing Pad) - Compressive Deflection

Elastomeric Pad (Adapter Bearing Pad)

Modified Elastomeric Pad