Contact with us:
  • +91 33 2555 9837
  • +91 33 2555 6957
  • +91 33 2554 5481

Thermoplastic Polyurethane Spring Pad

Technology: Transfer/Injection Moulding

Note: Design, Dimension & Properties can be changed to suit customer's requirement.

Polymer used

Thermoplastic Polyurethane

Operation Temperature

-15ºC to 60ºC

Operational Atmosphere

Heavy/Dusty/Sandy/Corrosive/Salty

Operational Humidity

0 to 100%

Metal Parts Spec 

Not Applicable

Shore A Hardness

85°A - 95°A

Tensile Strength

250 Kg/cm2 Minimum.

Elongation at Break

300% Minimum.

Compression Set at 80°±1°C for 24 (+0, -2)

45% Max. [ISO 815]

Specific Gravity

1.25 Max.

Shear Bond Strength

Not Applicable

After Hydrolysis in Water for 72 Hrs at 100°C

 

Change in SH

±5

Change in TS

±20%

Change in EB

±20%

Change in Volume after Immersion in Lubrex-150 for 72 (+0, -2) Hrs at 100±1°C 

20% Max

Change in Volume after Immersion in Grease for 72 (+0, -2) Hrs at 100±1°C 

15% Max.

 

Compressive Load - Deflection Characteristics

Compressive load: 5 ton

Deflection: 0.5 to 0.8 mm

Available Sizes (Refer Design)

X (mm) Y (mm) Z (mm)
210 136 10
205 60 10
210 130 6
225 120 10
185 105 6
210 124 6.35
210 130 10
225 130 10

Countries where we are Exporting our Products