Polymer used |
Natural Rubber suitably blended |
Operation Temperature |
-10ºC to 70ºC |
Operational Atmosphere |
Heavy/Dusty/Sandy/Corrosive/Salty |
Operational Humidity |
0 to 100% |
Metal Parts Spec (Pin) |
Steel IS: 1875 Cl.4 |
Metal Parts Spec (Sleeve) |
Seamless Steel Tube IS: 1239 |
Properties of Elastomer |
|
Tensile Strength |
203 Kg/cm2 Minimum. |
Elongation at Break |
300% Minimum. |
Compression Set |
20% Max. |
Shear Bond Strength |
550 PSI / 38.67 Kg/cm2 |
After Heat Ageing |
|
Change in SH |
+8, -0 |
Change in TS |
+10%, -20% |
Change in EB |
+10%, -20% |
Thrust Pad for Flexible Bearing
Polymer used |
Natural Rubber suitably blended |
Operation Temperature |
-5ºC to 60ºC |
Operational Atmosphere |
Heavy/Dusty/Sandy/Corrosive/Salty |
Operational Humidity |
0 to 100% |
Metal Parts Spec (Outer) |
Steel IS: 2062 Gr.A |
Metal Parts Spec (Inner) |
Steel IS: 1079 Gr. Fe 410 |
Properties of Elastomer |
|
Tensile Strength |
203 Kg/cm2 Minimum. |
Elongation at Break |
300% Minimum. |
Compression Set |
20% Max. |
Shear Bond Strength |
550 PSI / 38.67 Kg/cm2 |
After Heat Ageing |
|
Change in SH |
+8, -0 |
Change in TS |
+10%, -20% |
Change in EB |
+10%, -20% |
Compressive Load-Deflection Characteristics